The fabric shaver (also known as a lint shaver or fuzz remover) is a handhold electrical device that has a rotating blade underneath a blade net. It allows users to remove fuzz and pills on a fabric without damaging the fabric. It can be applied on different fabric-made items such as bedding, curtain or carpet, but mostly used for removing fuzz on clothes, especially sweaters, hoodies, or clothes made from wool, angora or cashmere. Fabric shavers are normally powered either by non-rechargeable dry cells, or with an internal rechargeable battery and an external charger. To use the fabric shaver, all the user has to do is check its battery and then press the on/off button to turn on the motor.
What Does a Fabric Shaver Do?
Its duty is a very simple one. It acts like a regular electric razor except it shaves the pills and loose threads off of your favorite clothing. They even look like real shavers with a nice blade cover over top a sharp blade or two.
Are Fabric Shavers Good Or Bad?
That is a depends question. They certainly are not bad when they work well and handle the duty assigned to them. Another point in their favor is that they are easy to use and handle a variety of fabric while saving you a lot of time.
Nothing is perfect and there is the possibility you will get a lemon. It happens and you simply just need to deal with it in the best way possible. There is nothing wrong with owning and operating one of these devices.
You just have to be careful how hard you press and if the blade is sharp enough or not.
Why Do We Need to Remove Fabric Pilling?
Try as you might, there’s no foolproof way to keep your clothes looking brand-new forever. Even if you’re diligent about laundering your clothes according to the tag directions, there’s one sign of clothing wear that is more or less unavoidable: pilling. Nearly every kind of fabric is susceptible to pilling over time, but they tend to be particularly apparent on sweaters and other outerwear. A sweater with pills all over it is likely to look old and worn out, even if it’s relatively new!
But don’t worry, let Aerb fabric shaver to save your favourite sweater!
Fabric Shaver vs Lint Roller
The main positive aspect that comes with using a fabric shaver over a lint brush is that it has no chemicals, glues, or other ingredients that can mess up your clothes or furniture.
2 negative issues that stand out with lint brushes is that the adhesive they have can pull the good fabric off your clothes, etc., along with the bad fibers. Then some of the glue may be pulled off the brush and get stuck in the fabric.
When that happens you have a new chore to take care of. In this head to head competition, the fabric shaver tops the lint brush just on those 2 negatives alone.
What Is the Aerb Fabric Shaver？
The Aerb Fabric Shaver – has six precision-made razor blades and a surprisingly strong motor, that actually originates from an electric razor. It has a super-powered motor, and its working speed can reach 8000-10000/RPM, which can help you save time and quickly removing fuzz on clothes. The high speed helps eliminate the risk of pilling getting stuck in the shaving membrane. Thus, you can safely shave off lint and pilling. Equipped with an upgraded battery, this lint shaver can Uninterrupted work more than one hour on a single charge.
Safety First
Damage-free Fabric Care: Honeycomb-shaped mesh foil, adjustable height spacer, and 2 speed settings all combine to protect your delicate garments from being cut or snagged;
The blades no longer work if the lid is open or the knife net is not tightened. The unique design offers a safe experience to protect your hand and clothing.
How to Use the Aerb Fabric Shaver?
1. Make sure it has been cleaned properly, remove leftover lint and fuzz from the last time you used the machine.
2. Put your garment on a flat surface.
3. Press the On/Off button and start circling the areas with pilling carefully.
4. Increase pressure gradually.
5. If you’re working on a heavily pilled garment you need to check the container and empty it after a while ( you normally feel and hear when the machine starts to run a little slower).
6. Ta-dah!
Depending on the state of your sweater, it make take a few minutes of work to remove all the pills. But the time goes by surprisingly quickly, because it’s really satisfying to watch all those little fuzz balls disappear! When you’re done, you’ll be amazed at the difference. Your sweater will look years younger, like it just had a fabric facelift!
Warm Tips:
* Test at an inconspicuous area of the clothes before using.
Please pay special attention to the following parts:
Around the buttons, zippers
Prominent part on the clothes
Remove the foreign object stuck on clothes
Thin or easily torn parts
Clothes connection place or sewing thread
Additional Tips with the Aerb Fabric Shaver
1. To avoid clothing damage while pruning: make sure the clothes are flat before use.
2. To avoid clothing damage: gently slide the remover for removing lint, over pressing is not suggested.
3. It is prohibited to use the lint remover to handle the clothes while you are wearing. It may cause damage to your body and clothes.
4. Please shut the power off immediately when there is any damage or fault, and do not assemble or disassemble the product without authorization.
- Please keep the power off during cleaning and maintaining this fabric shaver.
- For extra safety, the blades will automatically stop rotating when you remove the blade cover.
- Please do not take the lint collector off unless for cleaning it, otherwise it may cause bodily injury or mechanical damage.
- Do not use it to remove the lint on silk stockings for avoiding accidents.
How to Clean Aerb Fabric Shaver?
When you notice that the Aerb is working slow – or if it stops running – the container is full. Time to clean!
1. Shut the power off.
2. Lift the lint collector down to remove it and use the cleaning brush to clean the collector.
3. Unscrewing the foil mesh counterclockwise.
4. Take the blades and rotation shaft off.
5. Use the cleaning brush to clean foil mesh.
6. Use the cleaning brush to clean blades and rotation shaft.
7. Use the cleaning brush to clean lint inside the product frame.
- Replace the blade, rotation shaft, foil mesh, and lint collector back in reverse order.
Everything clean? No fuzz left anywhere? Then you’re done. Put the razor blades back and attach the mouthpiece and screw back the plastic ring. Now it’s ready to be used again.
Battery Charging and Precautions
1. When in insufficient power, please charge the product in time.
2. Ensure that the product is closed before charging.
3. Connect it with a USB charger or a mobile power for use.
4. Work for more than 40 minutes when it is fully charged, and the normal charging time is about 2 hours.
You’ll Never Know Unless You Try
Will a fabric shaver be the right solution for your fuzz off needs? You really won’t know until you use one. If you currently struggle when you try to use regular fuzz cleaner, you may find it worth your while to make a small investment in an electric fabric shaver, and see if your clothes and furniture like a sofa is like brand new. If you like the results, you’ll know you’ve made the right choice.
Frequently Asked Questions On – Aerb Fabric Shaver
Can I Use the Fabric Shaver on all fabrics?
Yes, you can. It is efficient for removing the fuzz from the Couch, Blanket, Curtain, Legging, Wool and so on. Warm tips: please follow the instruction before using.
- Can I remove pilling from furniture?
Definitely! Not just knits attract pilling, so can cushions, armrests or blankets.
- What’s the difference on 3-blades and 6-blades?
The 6-blades can work quickly and high efficiently than the 3-blades. It’s an upgraded version, covers a wider area on each pass with large shaving head as well as 6-leaf razor-sharp blades, so it is recommended to choose the 6-blades.
- What size batteries does this take?
It doesn’t need batteries because it is rechargeable, so that can save money and protect the environment.
- Once fully recharged, can this lint remover work without the cord (with no batteries)?
It equipped with an upgraded battery, this lint shaver can uninterrupted work more than one hour on a single charge. And there is no need to put batteries, it’s rechargeable by USB cord.
- How long does the AC cord?
The AC cord has 100 cm long, it’s convenient for use and recharge, the USB cord can easily recharge by power bank or power adapter.
- Does it come with a brush cleaner?
Yes, there is a brush to clean the fabric shaver in the package. You can use it to clean the container and blades.